Here you do not set up tension, so, at least, "iron" will not suffer. If the system "flew", reboot it and try again. Once selecting a new frequency value, click on "SET FSB" to start using this value (and pray that with your computer nothing bad happened). Please note that if you check the "ULTRA" mode, you will access additional frequencies (depending on the PLL). Secondly, not all PLL chips provide the same frequency ranges Some motherboards limit the frequencies available. First, do not be fond of excessive frequency change, otherwise it can harm your computer. The program must find the current frequency FSB, after which it will allow you to change it, just moving the slider. Select the name of your PLL chip from the drop-down menu and click on "Get FSB". You only need to find a chip with such a name to find out the version of PLL. On some motherboards, such as the one is shown in the picture above, the PCI Express and PCI tire frequencies are also connected. In practice, most motherboards FSB frequencies and memory are connected (using the coefficient that can be selected in the BIOS), while the frequency of PCI Express and PCI tires are fixed (100 MHz and 33 MHz, respectively).
Many modern motherboards are highlighted at least four reference frequencies: FSB, memory, PCI Express tires and PCI bus It is PLL that generates these frequencies. PLL (Phase Locked Loop) is a chip on a motherboard, which generates frequencies for various components.
0 kommentar(er)
